Room Control; Predelay - Lexicon PCM NATIVE ROOM Owner's Manual

Room Control

Most of the Room algorithm's parameters are self-explanatory, and you can find their
descriptions starting on page 26. Here's a brief descrition on the parameters unique to this
algorithm:
Room
Scale
Early

Predelay

Predelay
You will notice that there are two predelay parameters:
• Early Predelay
Is an overall predelay that delays all of the signal. As with a more typical reverb, it's often
used to create some separation between the wet and dry portions of the signal.
• Reverb Predelay
Is an additional delay that comes between the room impulse and the reverberation section.
It can have a large effect on the perception of size and/or liveness. A small value means
that reverb will begin while the room impulse is still being output. A larger value will delay
the reverb until nearer the end of the room impulse. An even larger value will create actual
14
Bass
Boost
Bass Reverb
Xover Predelay
Click Room
Select room
impulse category
Select
impulse
Normal/Reverse
impulse