Level Meters; Preset Category; Preset Selector; Realtime Display - Lexicon PCM NATIVE PITCH SHIFT Owner's Manual

Harman

Table of Contents

Level Meters

Shows the input, output and feedback levels. The Feedback meters measure the energy level

being fed back into the beginning of the delay line.

Presets for the algorithm are grouped into categories to make them easier to find. Clicking

in this area will show the list of categories. Selecting a category will load the presets for that

category in the Preset Selector.

Displays the list of presets within the selected category. Selecting a preset from the list will

cause the preset to be loaded into the plug-in.

Two unique visualizations help you to see inside the effect. See the "Realtime Display" section

for more detailed information.

These buttons are used to compare, edit, reload and store presets. This is explained in more

detail in the "Control Buttons" section of this manual.

These buttons control how the algorithm behaves when processing the signal. See the

"Parameters" section for more detailed information on these parameters.

This meter provides a visual of the perceived stereo image of the processed signal. See the

"Stereo Width Meter" section for more detailed information.

Parameter values are shown and controlled in this area. This is explained in more depth in the

"Fader Area" section of this manual. The meters display the current quality and stats of the

Pitch Shift algorithm, based on how the parameters have been set.

Table of Contents