Room Scale; Bass Xover; Bass Boost - Lexicon PCM NATIVE ROOM Owner's Manual

Harman

Table of Contents

separation and may be perceived as a slapback.



NOTE: Though the term "impulse" is used in this manual, these algorithms are NOT

convolution reverbs!

Room Scale

Is used to change the size of a room impulse.

Controls the frequency of a filter that is applied to the room impulse. It works in conjunction

with Bass Boost.

Can boost or cut the signal below the Bass Xover value.

On the right side of the fader field, you will see a pair of drop-down menus and a button. The

upper menu allows you to select a category of room impulses. The lower menu allows you to

select an impulse from the active category. The bottom button is used to switch the impulse

from Normal to Reversed, a rather significant effect.

Table of Contents

Do you have a question about the PCM NATIVE ROOM and is the answer not in the manual?