Sending Data Via Bluetooth - Sanyo SCP-6600 User Manual

Sending Data via Bluetooth

You can send Business Card or Contacts data saved on your phone
using Bluetooth technology.
Sending an Item
To send an item:
1.
Select
2. Select the device from the trusted devices list > Options (right
softkey) > Send Item.
3. Select an item (Business Card or Contacts) and press
4.
Make sure the other device is ready to receive data, and then
press Send (left softkey).
Sending a Contact
You can send a Contacts entry to another Bluetooth device.
To send a contact:
1. From standby mode, press Contacts (right softkey).
2. Highlight a contact and press Options (right softkey) >
Send Contact.
3.
Select one of the following options and press
will search for Bluetooth devices and display a list of available
devices.)
4.
Select the device and press
5.
Make sure the other device is ready to receive data, and then
press Send (left softkey).
Note:
Some vehicles with a built-in Bluetooth system allow you to transfer your
phone's contacts to the car. If your vehicle supports this feature, follow the above
steps to transfer your contacts to the vehicle's built-in Bluetooth system.
108
> Tools > Bluetooth.
To send a contact, select a contact, and then follow the
onscreen instructions to complete the transfer.
This to send the currently highlighted contact.
All to send all contacts in your Contacts list.
.
.
. (Your phone
12. Bluetooth