Auto Answer Mode; Setting The Current Time - Sanyo SCP-6600 User Manual

Auto Answer Mode

To set Auto Answer mode:
1.
Select
2. Select Hands-free or Speakerphone.
3. Select either 5 Seconds, 15 Seconds, or Off.

Setting the Current Time

To set the current time when you are in an area with no digital
network:
1.
Select
2.
Set the current time and date and press
Note:
This feature is only available when you are in an area with no digital
network available.
Setting the Open/Close Flip Option
This feature enables you to answer an incoming call by opening the
flip or to end a call by closing the flip.
To activate the Open Flip feature:
1.
Select
2. Select Open.
3. Select Answer Call.
To deactivate this feature, select No Action.
To activate the Close Flip feature:
1. From step 2 above, select Close. (You will see a message on the
display.)
2. Press OK (left softkey) to continue.
3.
Select an option from the following and press
End to end the call.
Continue (Mute) to continue the call. Your voice is muted,
however you can hear the caller's voice from the speaker.
Continue (Unmute) to continue the call. You can hear the
caller's voice and speak to the phone to answer.
Note:
The Close Flip feature does not apply when you are using the
speakerphone, a headset, or a car kit.
2. Your Phone's Settings
> Settings > Others > Auto Answer.
> Settings > Others > Set Time/Date.
> Settings > Others > Open/Close Flip.
.
.
39