Sanyo SCP-6600 User Manual page 19

be answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Note:
If the setting for Open Flip is set to
answer the call. (See "Setting the Open/Close Flip Option" on page 39.)
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
The LED (on the front of the phone) flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts list, the contact's name is
displayed.
When receiving a call, the following options are also displayed by
pressing Options (right softkey).
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Select Audio to switch the call to your desired device (if available).
Answer on Hold to put the call on hold. (See "Setting Answer on
Hold" below.)
Screen Call to answer the call by using a pre-recorded
announcement. (See "Setting Up Screen Call" on page 80.)
Quiet Ringer to mute the ringer. (if available.)
Tip:
Your phone offers additional ways to answer calls. (See "Auto Answer Mode"
on page 39 and "Setting Any Key Answer" on page 40.)
Setting Answer on Hold
This feature allows you to hold an incoming call when you cannot
answer immediately.
To set Answer on Hold:
When you receive an incoming call, press Options (right softkey)
> Answer on Hold. (The caller hears a message while waiting for
you to answer.
is on hold.)
1. The Basics
No Action
will be displayed on the screen while the call
, opening the phone will not
13