Leadtek Quadro Series Manual page 33

POWERdraft
The driver is installed in a separate directory. SETUP creates a program group
containing the following icons:
" POWERdraft HELP " opens the online Help file.
" Configure POWERdraft " configures POWERdraft as the
AutoCAD display driver.
" Configure Original Driver " configures the AutoCAD original
display driver ( WHIP ).
The two Configure icons only work when AutoCAD is not running.
3. Use these icons to configure either POWERdraft or the original driver that comes
with AutoCAD ( WHIP ) as the actual display driver for AutoCAD. After Setup
has completed successfully, POWERdraft is already configured.
When POWERdraft is configured, the POWERdraft logo will appear when AutoCAD
starts up.
Uninstalling POWERdraft
1. From Windows desktop, click
Start > Settings > Control Panel .
2. Click the " Add / Remove Programs " icon.
3. Click " POWERdraft " from the list.
4. Click the " Change / Remove " button.
5. Follow the instructions from the InstallShield program to complete
uninstallation.
Leadtek Quadro Series General Guide 31