About The Display And The Modes; Display - Korg Krome Quick Start Manual

About the display and the modes

Display

The KROME uses Korg's TouchView graphical user
interface.
By pressing or dragging objects shown in the display,
you can select programs or combinations, or edit
parameter values. Here we'll explain the names and
functions of these objects.
a: Mode button
b: Current page
e:
Popup
buttons
d: Parameters
a: Mode button
This indicates the currently selected mode.
When you press this button, the Mode menu will
appear. In the mode menu, press the name of the mode
that you want to move. If you select the currently
selected mode, the Page Select menu for that mode will
appear. Even in another mode, pressing the right side
of the name will display the Page Select menu for each
mode.
To close the menu, press the Close button or the EXIT
button.
You can also choose modes and pages by pressing the
front panel buttons. Press a mode select button to
select a mode, and then press the PAGE button to
access the page select screen.
b: Current page
This indicates the current page within the selected
mode.
Beginning at the left, this area shows the page number:
name, and tab name.
Mode button Page number: name
c: Tab
Most pages are divided into two or more tabs.
d: Parameters
The parameters for various settings are shown in the
display. Select a parameter in the display, and edit its
value.
You can use the VALUE dial and other value
controllers (see page 6) to edit a value by dragging
your finger in the display, or turn a setting on/off by
pressing it in the display.
For some parameters, you can press the parameter
twice in succession or long‐press and then release it to
access an on‐screen edit pad where you can edit the
value. see "Edit pad" on page 6 of the Operation
Guide.
f: Menu command button
e: Popup buttons
When you press a popup button, the available
parameter values will appear as a popup menu or a
tabbed menu.
f: Menu command button
* Menu
When this button is pressed, a list of menu commands
will appear.
The menu commands that appear will differ
depending on the page that's currently selected.
c: Tab
The menu will close when you press the display
somewhere other than the menu, or when you press
the EXIT button.
* Dialog box
When you select a menu command, you'll see a screen
containing the settings needed to execute the
command. This is called a dialog box. The dialog box
that appears will depend on the menu command that
you select. Some commands, such as Exclusive Solo,
do not display a dialog box.
Tab name
* Text edit button
When you press this button, the text edit dialog box
appears for changing the names of Programs,
Combinations, Songs, etc.
About the display and the modes
Menu command button
Menu button
Text edit button
Cancel button OK button
9
En-