Korg Kaossilator Pro Owner's Manual page 23

Controllers available in External Control mode
You can use the following controllers in External Control mode.
If note numbers are assigned to the touch pad, you can also specify the scale, key, and note range
in the same way as when the KAOSSILATOR PRO operates as a synthesizer.
Controller
Touch pad X-axis
Touch pad Y-axis (entire range)
Touch pad Y-axis (middle to top)
Touch pad Y-axis (middle to bottom)
Touch pad on/off
PROGRAM VOLUME knob
GATE ARP TIME/SPEED slider
GATE ARP button
PROGRAM MEMORY 1 button
PROGRAM MEMORY 2 button
PROGRAM MEMORY 3 button
PROGRAM MEMORY 4 button
PROGRAM MEMORY 5 button
PROGRAM MEMORY 6 button
PROGRAM MEMORY 7 button
PROGRAM MEMORY 8 button
LOOP RECORDER BANK A button
LOOP RECORDER BANK B button
LOOP RECORDER BANK C button
LOOP RECORDER BANK D button
PROGRAM/BPM knob
* If note range is set to "Prog" and key is set to "C"
TIP: If note range is set to "Prog," the range will be two octaves; if set to "FULL," the range will be eight oc-
taves.
Messages that can be transmitted/received outside of External Control mode
With the factory settings, the following MIDI messages can be transmitted and received.
Data and MIDI messages transmitted and received (factory settings)
Touch pad X-axis
Touch pad Y-axis
Touch pad on/off
GATE ARP on/off
GATE ARP time
GATE ARP speed
PROGRAM VOLUME knob
LOOP RECORDER BANK A button
LOOP RECORDER BANK B button
LOOP RECORDER BANK C button
LOOP RECORDER BANK D button
PROGRAM/BPM knob
Transmitted MIDI message (factory setting)
Note on/off (#48–#72)*
Control change (#117)
Control change (#118)
Control change (#119)
Control change (#92)
Control change (#94)
Control change (#93)
Control change (#95)
Control change (#49)
Control change (#50)
Control change (#51)
Control change (#52)
Control change (#53)
Control change (#54)
Control change (#55)
Control change (#56)
Control change (#80)
Control change (#81)
Control change (#82)
Control change (#83)
Program change (#0–#127), Timing clock
Control change (#12)
Control change (#13)
Control change (#92)
Control change (#90)
Control change (#93)
Control change (#91)
Control change (#94)
Note on/off (#36)
Note on/off (#37)
Note on/off (#38)
Note on/off (#39)
Program change, bank select, MIDI timing clock (only if
the clock setting is Int)
23