Using An Sd Card; Inserting Or Removing Sd Cards; Checking The Total Capacity Of The Card - Korg Kaossilator Pro Owner's Manual

Using an SD card

You can use an SD card to save or load inter-
nal data.
Audio files (WAV format or AIFF format) that
you've created on your computer can also be
loaded.
Before you can use the SD card, you must format it in
the KAOSSILATOR PRO. Don't use your computer or digital
camera to format (initialize) a card you plan to use with the
KAOSSILATOR PRO. If the card was formatted on a differ-
ent device, it may not work correctly with the KAOSSILA-
TOR PRO.
TIP: The SD card is not included. It must be pur-
chased separately.
TIP: The KAOSSILATOR PRO can use SD cards up
to 2 Gbytes in capacity.
TIP: The KAOSSILATOR PRO cannot use SDHC or
SDXC cards.
About the write protect setting of an SD card
SD cards have a write protect switch that pre-
vents the data from being overwritten acciden-
tally and lost. If you set the card's switch to the
protected setting, it will be impossible to write
or erase data on the card, or to format it. If you
need to save edited data on the card, move the
switch back to its original unprotected setting.
Write protect
switch
Handling SD cards
Please carefully read and observe the instruc-
tions that came with your SD card.
Format your SD card in the KAOSSILATOR PRO before
using it. If you use an SD card that was formatted by a dif-
ferent device, it may be unusable, or you might not be able
to enter Function parameters. If this occurs, you may be
asked to format the card.
16
Protected

Inserting or removing SD cards

Inserting an SD card
Taking care that the SD card is oriented cor-
rectly, push into the slot until it locks into place
with a click. Insert the card, making sure that it
is oriented correctly. The gold contacts should
be facing down, and the angled corner to your
right.
Removing an SD card
Press the SD card inward until it pops outward
with a click; then pull out the card to remove
it.
Checking the total capacity of the
card
Here is how you can display the total capacity
of the SD card.
1. Hold down the SHIFT button and press the
PROGRAM MEMORY 1 (CARD) button.
2. Use the PROGRAM/BPM knob to select
"InFo" (card capacity).
3. Press the PROGRAM/BPM knob to view
the total capacity of the card.
Press the TAP TEMPO button (lit orange) to
return select another parameter, press the
SHIFT button to return to normal operation.
SD Card Slot
SD Card