Setting The Date And Time - Korg mr-1 Owner's Manual

Setting the date and time

If you set the MR-1's date and time, the recorded files will have the correct date and time
stamp. Here's how to set the internal clock.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm the date and time indication in the top line.
The date and time setting (Clock) screen will appear.
3. Use the P-dial to select and confirm "Year."
The selection icon will change from " " to " ", and the year indication will be highlighted.
4. Turn the P-dial to select the year, and press the P-dial (or the menu button) to confirm.
The selection icon will change from " " to " ".
5. In the same way, use the P-dial to select and confirm the "Month," "Day," "Hour,"
"Minute," and "Sec."
6. When you've finished making settings, press the menu button to return to the system
setting (SYSTEM) screen.
Alternatively, you can return by using the P-dial to select and confirm "<-Back" in the screen.
If you leave the MR-1 sitting for two or three days and the rechargeable battery does not have
enough power to turn on the MR-1, the date and time setting will be reset. After recharging, you'll
need to make this setting again. If the date and time have been reset, a message will remind you to
make the setting.
The time will continue to advance while you're setting it.
28
Push
Push
Push
Push
Push