Parts Of The Mr-1; Front And Side Panels - Korg mr-1 Owner's Manual

Parts of the MR-1

Front and side panels

1. DC 5V connector
Connect the included AC adaptor here (also used for charging the battery).
2. USB connector
This lets you use a USB cable to connect the MR-1 to your computer.
3. Display
The display shows the level meters and counter during recording and playback, and can
also show information about the project (→p.13) or file, and parameter settings.
4. Playback/Pause button
This button starts recording or playback. During recording or playback, you can press this
button to pause (temporarily halt).
5. Record button / Record LED
Press this button to enter record-ready mode; the record LED will blink slowly. During
recording, the record LED will blink rapidly.
6. Rewind button
Use this button to select a project (→p.13) or file, or to rewind.
7. Stop button
This button stops recording or playback.
8. Fast-forward button
Use this button to select a project (→p.13) or file, or to fast-forward.
3
1
2
4
5
6
9
10
11
12
7
8
7