Setting The Power Supply - Kenwood K-521 Instruction Manual

Setting the Power Supply

Specify whether power is supplied to an iPod or USB device, even when iPod or USB device is
connected but not selected as an input source.
(Power is always supplied to a device selected as an input source, regardless of this setting.)
66
K-521 K-521 K-521
1 1
Press the [MODE] key.
2 2
Select "P.SUPPLY".
Press the [C] or [D] key.
Press the [ENTER] key.
3 3
Select "ON" or "OFF".
Press the [A] or [B] key.
Press the [ENTER] key.
Power is always supplied when
the system is turned on.
Power is supplied only when the
device is selected as an input
source.