JVC VN-H37 Manual page 3

Ip camera api guide
Table of Contents

Advertisement

Version
Date
2.01
2012/05/08 Page 5, "JVC API for Audio" is added.
3.00
2012/05/21 Page 5, 13. JVC API for SD Card Record is added.
4.00
2012/06/29 Page 30, section 9, Corrections of typographical error
Updates
Page 5, "Getting Audio from the Camera via HTTP" is added.
Page 5, "Sending Audio to the Camera" is added.
Page 33, section 10, JVC API for Audio is added.
Page 36, section 11, Getting and Setting Alarm Action: "audioplay" and
"pinout" are added.
Page 41, section 11, Getting and Setting Alarm Trigger: "m1", "b1", "m2", "b2",
"audio_detect1", "audio_detect2", "tampering_detect", "ncbwe" and "ncbws"
are added.
Page 87, section 28, "Getting Audio from the Camera via HTTP" is added.
Page 90, section 29, "Sending Audio to the Camera" is added.
Page 92, section 31, List of ActiveX: "Audio Monitor" and "Audio Sending
Client" are added.
Page 93, section 31, Properties of ActiveX: Explanation of default Folder
Name is added.
Page 94, section 31, Properties of ActiveX: Audio Monitor / Audio Sending
Client is added.
Page 95, section 31, Method of ActiveX Control: Audio Monitor / Audio
Sending Client is added.
Page 96, section 31, How to use ActiveX control by HTML: Audio Monitor and
Audio Sending Client are added.
Page 97, section 31, HTML Sample: Audio Monitor and Audio Sender are
added.
Page 5, 31. Getting SD Card data from the Camera via RTSP/RTP is added.
Page 5, 32. Exporting H.264 data from SD Card to the PC is added.
Page 35, section 11, Explanation of SD Card recording is added.
Page 51, section 12, Getting and Setting Parameters of Pre/Post Recording
for FTP : Explanation of Encoder No. is added.
Page 53, 13. JVC API for SD Card Record is added.
Page 96, 31. Getting SD Card data from the Camera via RTSP/RTP is added.
Page 97, 32. Exporting H.264 data from SD Card to the PC
change from "channel is saved" to "channel is availed"
Page 30, section 9, Example of Setting Compression Format is added.
Page 35, section 11, event No.10 is added.
Page 60, section 14, "Moving Specified Position to Center" is added.
3

Advertisement

Table of Contents
loading

Table of Contents