JVC VN-H37 Manual page 33

Allowed users admin, operator, user
Setting H.264 or MPEG-4 I-Frame Interval
Format /api/param?encode(number).iframeinterval=data
Example /api/param?encode(1).iframeinterval=15
Example of response encode(1).iframeinterval&202 Accepted(encode.status=save)
Interpretation Change I-Frame interval of H.264 or MPEG-4. This API is valid when compression format is
h264high, h264baseline or mpeg4. In case of H.264, specify 5, 10, 15, 30, 60, 90, or 120. In case of MPEG-4,
specify 15 or 30. The change of the first channel is availed by the API, encode(1).status=save.
Allowed users admin, operator
Getting Frame Rate Setting
Format /api/param?encode(number).framerate
Example of response encode(1).framerate=15&200 OK
Interpretation Acquire frame rate of the encoding.
Allowed users admin, operator, user
Setting Frame Rate
Format /api/param?encode(number).framerate=data
Example /api/param?encode(1).framerate=30
Example of response encode(1).framerate&202 Accepted(encode.status=save)
Interpretation Change frame rate of the encoding. In case of H.264, specify 30, 25, 15, 10, 7.5, 5, 3, 2, or 1. In
case of JPEG, specify 30, 15, 10, 7.5, 5, 3, 2, or 1. When 30fps or 25fps is set, 3DDNR, motion detection and
analog viedeo output are not available. The change of the first channel is availed by the API,
encode(1).status=save.
Allowed users admin, operator
Getting Monitor Out Status
Format /api/param?video.output.status
Example of response video.output.status=on&200 OK
Interpretation Acquire monitor out status. "on" or "off" is returned.
Allowed users admin, operator, user
Setting Monitor Out Status
Format /api/param?video.output.status=data
Example /api/param?video.output.status=on
3 3