Table of Contents
Advertisement
17. Load Pattern of the View Windows
This chapter describes how to make load patterns of the registered View Windows.
17-1. Registering the View Window Load Patterns
This function registers the display sizes and positions of the View Windows.
Up to 4 load patterns can be registered.
1
Adjust the positions and display sizes of the View Windows.
2
Open the [Window] menu, select [Save Pattern] and click on
the desired one of the pattern numbers from [No. 1] through
[No. 4].
3
To modify a previously registered load pattern, set the View
Window positions and sizes as desired, perform step 2 above
and click on the pattern number of the pattern to be modified.
17-2. Displaying View Windows in a Registered Pattern
This function displays the View Windows in one of the registered load patterns.
Open the [Window] menu, select [Load Pattern] and click on the desired one of the pattern numbers from [No. 1]
through [No. 4].
The View Windows will be displayed in the selected pattern.
17-3. Display / Hide All View Windows
This function displays or hides all of the registered View Windows.
1
To display all of the View Windows, open the [Window] menu and select [Display All].
2
To hide all of the View Windows, open the [Window] menu and select [Hide All].
Advertisement
Table of Contents
