5-2.Vn-C2U/C3U/C30U Controller; 5-3.Setting The Position Memory - JVC VN-S400U User Manual

Multi viewer
Table of Contents

Advertisement

5-2. VN-C2U / C3U / C30U Controller
When a connected view point device is one of the models mentioned above, the [Camera Control] box is dis-
played below the live controller.
[Position Display]
Shows the current pan/tilt position and zoom setting.
[Pan Tilt Step]
Used to set the panning/tilting angle per click.
[Tele Single-Step Button]
Each click on the button zooms into the image.
(This function is disabled in case the View Point is VN-C2U.)
[Wide Single-Step Button]
Each click on the button zooms out of the image.
(This function is disabled in case the View Point is VN-C2U.)
[Pan/Tilt Adjustment Buttons]
Arrow buttons are provided to control the pan/tilt position
of the camera.
The panning/tilting angle per click can be set in the [Pan Tilt Step].
[Zoom Slider]
Dragging the mouse on this control adjusts the zoom ratio.
(This function is disabled in case the View Point is VN-C2U.)
[Position Memory]
Clicking on one of the buttons points the camera to the previously registered position. (See section 5-3, "Setting
the Position Memory" below for the method of setting the position memory positions.)
5-3. Setting the Position Memory
The position memory function enables registration of the pan/tilt/zoom adjustment positions in the memory. Up to
10 positions (or 6 positions with the VN-C2U) can be registered in the memory.
1
Point the camera to the desired position by adjusting the [Camera Control] box.
2
Right-click on the desired one of the [Position Memory] buttons 1 to 10 (or 1 to 6 with the VN-C2U) and then
click on [Memory].
3
Henceforth, clicking on the [Position Memory] button points the camera to the position registered under the
button and the required image is displayed in the view window.
4
To change a previously registered position memory setting under a button, point the camera to a new position,
right-click on the same button and right-click on [Memory].
Position display
The position is now registered in the memory.
13
Pan/Tilt adjustment buttons
Zoom Slider and
Tele/wide single-step button

Advertisement

Table of Contents
loading

Table of Contents