Table of Contents
Advertisement
15. View Point Setup
15-1. Changing the View Point Name
This function changes the view point name and view channel name.
1
In the Tree View Area Layout, select the view point or view channel to be renamed.
2
Open the [Setting] menu and select [View Point].
The [View Point Setting] dialog box appears.
3
Enter the new name within 32 characters for [View Point Name]
or [View Channel Name].
* If the view channel name is modified during recording,
the view channel will be recognized as another view channle
in its playback.
4
Click on the [OK] button to close the dialog box.
15-2. Setting the Password for a View Point
This function sets the password for connecting to a view point.
The password should be registered in the connected device at the view point in advance. For details, refer to the
instruction manual for the connected device. (The following setting is not available while recording is in progress.)
1
In the Tree View Area Layout, select the desired view point or the view channel.
2
Open the [Setting] menu and select [View Point].
The [View Point Setting] dialog box appears.
3
Enter the desired password within 8 characters in [Password].
Enter the same password again in [Re Type].
* In setting of the password, Operator authority of the View Point is
required. In control of the external device, Administrator authority
of the external device is required.
4
Click on the [Apply] button.
This setting is effective after opening this Work Space next time.
5
The password entry will be requested if [Particular Password Enable] is checked. If not checked, the default
password for the Work Space specified on the Option dialog box will be requested.
See section 12-4, "Setting the Password for the Work Space" about setting the default password.
6
Click on the [OK] button to close the dialog box.
35
Advertisement
Table of Contents
