Table of Contents
Advertisement
40
EN
Using Windows
®
You can use Windows
Preparation
1
Confirm that Windows
You can download the latest version of Windows
Microsoft's web site:
http://www.microsoft.com/
2
Install [USB Video Streaming driver].
Refer to "Software Installation (Windows
Guide.
If the installation of [USB Video Streaming driver] has already been completed, go to step 3.
3
Connect the camcorder to the PC with a USB cable.
Refer to "Connections (Windows
4
Set the camcorder to the memory card recording mode.
The camcorder is now on.
"
" appears on the camcorder's LCD monitor.
If "
" does not appear, install [USB Video Streaming driver]. Refer to "Software Installation
®
(Windows
)" (
NOTE:
The procedure is different when reading or writing a memory card.
5
Select [Start] – [Settings] – [Control Panel] and double click the [Multimedia] icon. Select the
[Audio] tab and click [JVC PIX-MCV Audio Capture] in the [Preferred device] box.
6
®
Start NetMeeting
An environment that provides for connection to the Internet and an e-mail address are also required.
Select [JVC PIX-MCV Audio Capture] as a recording device in the [Audio adjustment] wizard.
7
In the [Conference] menu, click [Directory].
The [Find Other Party] dialog box appears.
8
Register with HotMail as instructed on the screen.
9
Set up MSN Messenger as instructed on the screen.
If setup was completed previously, the MSN Messenger Service logon window appears.
10
Exit NetMeeting
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET
®
NetMeeting
®
NetMeeting
to conduct video conferences over the Internet, using a camcorder.
®
®
NetMeeting
®
)" (
pg. 5) in the Software Installation and USB Connection Guide.
, and set up the program as instructed on the screen.
®
and MSN Messenger Service.
®
®
(Windows
Only)
3.0 or later and MSN Messenger Service is installed.
®
NetMeeting
®
)" (
pg. 5) in the Software Installation and USB Connection
pg. 9) in the Software Installation and USB Connection Guide.
®
or MSN Messenger Service from
Advertisement
Table of Contents
