Troubleshooting; Requesting; Assistance Or - Roper FGP31OE Use And Care Manual

TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of
any kind. Check the lists below and on the next page before calling for assistance or service.
If you still need help, see "Requesting Assistance or Service" on page 24.
RANGE DoEs NOT WORK
PROBLEM
Nothing works
CAUSE
0 The range is not properly connected to the gas supply. Contact an authorized
Roper service technician to reconnect the range to the gas supply. (See the
Installation Instructions.)
0 The control knob is not set correctly. Push in the control knobs before
turning them.
OVEN~BROIIIR BURNER
PROBLEM CAUSE
The oven does
not work
0 You have not turned the oven temperature control knob to a temperature
setting.
0 The gas shutoff valve is in the off position. (See the Installation Instructions.)
The burner fails to light
0 The pilot light is out. See "Lighting standing pilots" on page 7, contact an
authorized Roper service technician, or see the Installation Instructions.
The burner flames lift
away from the ports,
are yellow, or are noisy
0 The air/gas mixture is incorrect. Contact an authorized Roper service
technician to check the air/gas mixture or see the Installation Instructions.
22