Roland VIMA JM-5 Midi Implementation Manual

MIDI Implementation

1. Received data
Channel Voice Messages
Note off
Status 2nd byte
8nH kkH
9nH kkH
n= MIDI channel number: 0H~FH (Ch.1~16)
kk= note number: 00H~7FH (0~127)
vv= note off velocity: 00H~7FH (0~127)
Note on
Status 2nd byte
9nH kkH
n= MIDI channel number: 0H~FH (Ch.1~16)
kk= note number: 00H~7FH (0~127)
vv= note on velocity: 01H~7FH (1~127)
• Not received when Rx.NOTE MESSAGE= OFF. (Initial value is ON)
Polyphonic Key Pressure
Status 2nd byte
AnH kkH
n= MIDI channel number: 0H~FH (Ch.1~16)
kk= note number: 00H~7FH (0~127)
vv= key pressure: 00H~7FH (0~127)
• The resulting effect is determined by System Exclusive messages. With
the initial settings, there will be no effect.
Control Change
• The value specified by a Control Change message will not be reset even
by a ProgramChange, etc.
Bank Select (Controller number 0, 32)
Status 2nd byte
BnH 00H
BnH 20H
n= MIDI channel number: 0H~FH (Ch.1~16)
mm= Bank number MSB: 00H~7FH
Initial value= 00H
ll= Bank number LSB: 00H~7FH
• Bank Select processing is suspended until a program change is received.
Modulation (Controller number 1)
Status 2nd byte
BnH 01H
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Modulation depth: 00H~7FH (0~127)
• Not received when Rx.MODULATION= OFF (Initial value is ON).
• The resulting effect is determined by System Exclusive messages. With
the initial settings, this is Pitch Modulation Depth.
Portamento Time (Controller number 5)
Status 2nd byte
BnH 05H
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Portamento Time: 00H~7FH (0~127),
Initial value= 00H (0)
3rd byte
ccH
00H
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
3rd byte
vvH
3rd byte
vvH
Model:
Date:
Version:
Data Entry (Controller number 6, 38)
Status 2nd byte
BnH 06H
BnH 26H
n= MIDI channel number: 0H~FH (Ch.1~16)
mm, ll= the value of the parameter specified by RPN/NRPN
mm= MSB, ll= LSB
Volume (Controller number 7)
Status 2nd byte
BnH 07H
n= MIDI channel number 0H~FH (Ch.1~16)
vv= Volume: 00H~7FH (0~127),
Initial value= 64H (100)
• Volume messages are used to adjust the volume balance of each Part.
• Not recevied when "Volume" RX Event is off.
Pan (Controller number 10)
Status 2nd byte
BnH 0AH
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= pan: 00H~40H~7FH (Left~Center~Right),
Initial value= 40H (Center)
• Not received when "PanPot" RX Event is Off
Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Expression: 00H~7FH (0~127), Initial value= 7FH (127)
• Not received when "Expression" RX Event is Off.
Hold 1 (Controller number 64)
Status 2nd byte
BnH 40H
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Control value: 00H~7FH (0~127)
• Not received when "Hold" RX Event is Off.
Portamento (Controller number 65)
Status 2nd byte
BnH 41H
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Control value: 00H~7FH (0~127) 0~63= OFF, 64~127=
ON
Sostenuto (Controller number 66)
Status 2nd byte
BnH 42H
n= MIDI channel number: 0H~FH (Ch.1~16)
vv= Control value: 00H~7FH (0~127) 0~63= OFF, 64~127= ON
• Not received when "Sostenuto" RX Event is Off.
JM-5
July 2011
1.00
3rd byte
mmH
llH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
1