Local; Loading A Midi Set - Roland BK-5 Owner's Manual

MIDI parameter
Explanation
group
Edit Rhythm Parts Here, you can edit all MIDI parame-
ters of the rhythm parts (ADrum,
ABass, Acc1~6). See page 104.
Edit Tone Parts Here, you can edit all MIDI parame-
ters related to the keyboard parts
(UP1, UP2, LWR and Mel.Intell). See
page 105.
Edit Song Parts Here, you can edit all MIDI parame-
ters of the Song parts. See page 105.
Edit System This groups contains all MIDI param-
eters that apply to the BK-5 as a
whole. See page 106.

Local

This setting allows you to establish or remove the con-
nection between the BK-5's keyboard and the internal
tone generator.
Parameter Setting
Local On, Off (---)
If you select "On" (default), playing on the BK-5's key-
board or playing back a song/rhythm causes the corre-
sponding notes to sound. If you select "Off", the corre-
sponding MIDI messages are no longer sent to the
internal tone generator – but they are still transmitted
to the MIDI OUT socket (or USB COMPUTER port) and
hence to external MIDI instruments. When a parameter
is modified inside a part, the display shows "---".
Sound source
MIDI OUT
LOCAL ON
+Rhythm
+Rhythm
+ SMF
+ SMF

Loading a MIDI Set

The MIDI Set environment contains two options with
preset settings. All you need to do is select them to
restore the default settings for the sections or aspects in
question. In addition, there are 8 MIDI Set memories
where you can save your own settings.
Parameter Setting
MIDI Set Key/Rhythm, PK Series, Song,
User1~8
Key/Rhythm
This option recalls the factory MIDI settings for the
keyboard parts (UP1, UP2, LWR, MELODY INT) and the
rhythm parts (ADrum, ABass, Acc1~6). The most
important (and practical) use for this field is resetting
Sound source
MIDI OUT
LOCAL OFF
+Rhythm
+Rhythm
+ SMF
+ SMF
Backing Keyboard BK-5
the MIDI transmit/receive channels of the real-time
and rhythm parts and to switch off MIDI transmis-
sion/reception of the song parts.
NOTE
This parameter applies to both reception (RX) and trans-
mission (TX). The BK-5 indeed allows you to set separate TX
and RX channels for each part.
PK Series
This option prepares the BK-5 for MIDI control using
a PK-series MIDI pedalboard. The most important set-
tings are: "Part Switch" is set to "Int" and "Rhythm
PcRx" is set to "On".
Song
This option restores the factory settings for the
BK-5's SMF song parts and switches off the MIDI
transmission and reception of the real-time and
rhythm parts.
User1~8
The BK-5 also allows you to store and recall 8 differ-
ent MIDI configurations.
NOTE
Loading a MIDI Set only changes the MIDI settings and has
no effect on the remaining parameters.
1.
Rotate the [CURSOR÷VALUE] dial to select
the "MIDI Set" field.
2.
Press the [ENTER/SELECT] button to edit the
"MIDI Set" field.
The "MIDI Set" field is now displayed in reverse.
3.
Use the [CURSOR÷VALUE] dial to select the
MIDI Set you want to load.
The BK-5 loads the selected MIDI Set.
Press the [ENTER/SELECT] button if you want to edit
other parameters on this page.
r
MIDI parameters
103