Roland BK-5 Owner's Manual page 91

Copy
This function can be used to copy individual tracks,
Modes and Divisions to replace existing parts while
keeping the remaining parts of the rhythm already in
the RAM memory.
1.
Set "Location" to "Source".
The following parameters are displayed:
Parameter Setting
Location Source, Desti-
nation
Track ADrums~Acc6,
ALL
Mode Major, Minor,
7th, ALL
Division Intro 1~4,
IntroALL,
Main 1~4,
MainALL,
Fill Dwn 1~3,
Fill DwnALL,
Fill Up 1~3,
Fill UpALL,
End 1~4,
EndALL
From Bar~ See page 88.
To CPT
2.
Select a rhythm.
Selecting a factory rhythm: Use the RHYTHM FAM-
ILY buttons and the displayed parameters to select
the desired rhythm. Skip to step (3) below.
Selecting an 'external' rhythm: You can also work
with a rhythm on a USB memory:
(a) Press the [USB MEMORY] button to jump to the
"USB Memory" page.
(b) Select the rhythm that contains the track(s) you
want to copy.
3.
Explanation
Allows you to select
the rhythm whose
tracks you wish to
copy ("Source") to
another rhythm ("Des-
tination").
Allows you to select
the track you wish to
copy. Select "ALL" to
edit all tracks.
4.
Allows you to select
the Mode to be copied.
Use this parameter to
select the Division you 5.
want to copy.
6.
7.
Backing Keyboard BK-5
Rhythm Composer (programming your own rhythms)
NOTE
The "Copy" page now displays a "USB MEMORY" field to
indicate that you can select a rhythm on the connected
USB memory.
Press the [ENTER/SELECT] button.
NOTE
When you import a rhythm, the "Location" parameter is set
to "Destination". To continue as explained below, you need
to select the "Source" setting.
Rotate the [CURSOR÷VALUE] dial to select
the "Track" parameter, then press the
[ENTER/SELECT] button.
Rotate the [CURSOR÷VALUE] dial to select
the track to be copied.
You can also select "ALL" to copy all tracks of a given
Mode/Division. In that case, "Destination–Track" (see
below) is also set to "ALL".
Repeat this operation with the "Mode" and
"Division" parameters to select the Mode
(Major, Minor, 7th, ALL) and Division (Int 1~
4, Int ALL, Main 1~4, Main ALL, FDw 1~3,
FDw ALL, FUp 1~3, FUp ALL, End 1~4, End
ALL).
Press the [KEY] button to listen to the pat-
tern you are about to copy.
NOTE
This audition function is not available when you select
"ALL" for the "Mode" or "Division" field.
r
91