JUKI HZL-K85 Service Manual page 24

SERVICE MANUAL
Needle position
SCE. 07
Checking:
1. Set test mode at 2.
2. Turn hand wheel by hand and see if the position of needle is at center of
needle hole on needle plate.
Adjustment:
1. Remove face cover.
2. Loosen screw (a) and turn plastic nut (b) to adjust position of needle.
Turn to clockwise direction --- needle moves to left side
Turn to counter clockwise direction --- needle moves to right side
3. After adjustment secure screw (a).
a b
Date:
2011/09/23
Page:
24/39
Model:
K65&K85