Needle Threader - Janome Sewing Machine Instruction Book

z
q
x
w
e
c
v

Needle Threader

Turn OFF the power switch when using the needle
threader.
z Lower the presser foot. Raise the needle to its highest
position. Pull down the needle threader knob q as far
w
as it will go. The hook comes out through the needle
eye from behind.
q Knob
x Draw the thread from guide (a) e to guide (b) r and
under the hook w. Draw the thread up along the right
side of guide (b) r and slip the thread in between
guide (b) and the holder plate t.
w Hook
t
e Guide (a)
r Guide (b)
t Holder plate
r
c Raise the knob in the direction of the arrow, drawing
the thread loop through the needle.
v Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90
are recommended.
14
CAUTION: