Janome Sewing Machine Instruction Book page 14

z
q
x
c
v
e
b
w
r
• Inserting the bobbin
z Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
q End of thread
x Guide the thread into the first notch w on the front
side of the bobbin holder.
w Notch
c Draw the thread to the left, sliding it between the
tension spring blades.
v Continue to draw the thread lightly until the thread
slips into the second notch e. Pull out about 6˝
(15 cm) of thread.
e Notch
b Attach the hook cover plate. Check the threading by
referring to the diagram r shown on the hook cover
plate.
r Threading diagram
12