Bobbin Winding - Janome Sewing Machine Instruction Book

w
e
e
q
w
q
r
w
q

Bobbin Winding

• Removing the bobbin
Gently slide the hook cover release button q to the
right and remove the hook cover plate w.
Lift out the bobbin.
q Hook cover release button
w Hook cover plate
• Horizontal spool pin
Lift up the spool pin q. Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder w, and press it firmly
against the spool of thread.
The small spool holder e is used with narrow or small
spools of thread.
q Spool pin
w Large spool holder
e Small spool holder
• Additional spool pin
The additional spool pin w is for winding bobbins,
without unthreading the machine.
Set the spool stand q under the additional spool pin w.
Insert the additional spool pin w into the hole e.
Place the felt r and a spool on the pin.
q Spool stand
w Additional spool pin
e Hole for additional spool pin
r Spool pin felt
10