To Snap On And Snap Off The Preser Foot - Janome Sewing Machine Instruction Book

To Snap On and Snap Off the Presser Foot
To snap off
Turn the handwheel toward you to
raise the needle to its highest
position. Raise the presser foot.
Press the lever on the back of the
foot holder.
The presser foot will drop off.
To snap on
When attaching the presser foot,
the pressure dial should always be
3
at position " ".
Place the presser foot so the pin
on the foot lies just under the
groove of the foot holder.
Lower the foot holder to lock the
foot in place.
Additional Clearance
The presser foot can be raised
higher for additional clearance.
11