Part Iii - Janome DigitizerPro Instruction Book

86

Part III

Digitizing with
Artwork
There are two broad categories of artwork file, both of which can be
imported into EasyDesign for use as digitizing backdrops – vector and
bitmap. To create good quality embroidery, you need to choose or create
suitable artwork of either format.
Digitizing with backdrops
This section describes how to scan it into JANOME Embroidery Software and
edit it before use as a digitizing backdrop. It also describes how to insert into
JANOME Embroidery Software and save bitmap images, as well as how to
show and hide them as you digitize. Editing images in external graphics
packages is also covered. See Digitizing with Backdrops for details.
Preparing images for automatic digitizing
This section describes how to prepare both outlined and non-outlined
images for automatic digitizing. See Preparing Images for Automatic
Digitizing for details.
Automatic digitizing
This section describes how to automatically convert bitmap images to
embroidery objects and complete designs, as well as how to create
embroidery from grayscale images. See Automatic Digitizing for details.