Aligning Objects - Janome DigitizerPro Instruction Book

3 For more accurate positioning, press the arrow keys to
'nudge' the object into the required position.
Try this! Zoom in to make small adjustments. The
distance the object moves depends on the current
zoom factor. The greater the zoom factor, the smaller
the distance moved.
Positioning objects using object details
You can position selected objects relative to the
center of a design by entering its X:Y coordinates
in the Object Details dialog.
To position objects using object details
1 Select the object/s to move.
2 Double-click the object to open the Object Details
dialog, and select the Dimensions tab.
3 Enter the new object coordinates in the Position fields.
4 Click OK.
The object is centered over the coordinates you set.

Aligning objects

Use Alignment > Align Left to left-align selected
objects.
Use Alignment > Align Centers Vertically to align
selected objects through their vertical centers.
Use Alignment > Align Right to right-align
selected objects.
Cross-hair cursor
centers objects
Enter new
coordinates
JANOME Embroidery Software Instruction Book
Chapter 16 Arranging and Transforming Objects
Use Alignment > Align Top to top-align selected
objects.
Use Alignment > Align Centers Horizontally to
align selected objects through their horizontal
centers.
Use Alignment > Align Bottom to bottom-align
selected objects.
Use Alignment > Align Centers to align selected
objects to their centers.
Quickly align selected objects in a design to the
left, right, top, bottom or center of a specific
object. The Align tools in Alignment toolbar offer
a set of buttons to trigger corresponding functions
found in the Align popup menu. The tools are all
enabled when two or more objects are selected.
To align objects
1 Select the objects you want to align.
Note Objects are aligned with the last object selected.
2 Select the object you want to align with.
3 Click an alignment tool or select Align in the popup
menu by right-clicking the objects.
1
2
3
Try this! You can also access the commands via the
Resequence List. See also
objects.
Align center
Align left
Align bottom
Resequencing selected
118