Displaying The Hoop - Janome DigitizerPro Instruction Book

To create new designs with a custom template, select
File > New.
The New dialog opens.
Select a template from the list and click OK.
Displaying hoops and grids
A representation of the selected hoop is displayed
in the Design Window. This provides a guideline for
sizing and positioning designs. Use grid lines to
help accurately align or size embroidery objects.

Displaying the hoop

Click View > Display Hoop to hide or show the
hoop.
Hoops are required to hold the fabric tight while
stitching on your machine. They are available in
different sizes. A representation of the selected
hoop providing a guideline for sizing and
positioning your design
Window. See also Grids and
Note The boundary of the working area within the
hoop is displayed as a thin red line. If any part of
the design lies outside the stitching area for the
selected hoop, a warning appears when saving.
This prevents you from accidently stitching outside
this area and damaging your machine by hitting
the hoop with the needle. You can show or hide the
hoop at any time.
To display the hoop
Click the Display Hoop icon to toggle hoop display on
or off.
is displayed in the Design
Hoops.
JANOME Embroidery Software Instruction Book
Alternatively select View > Hoop.
Alternatively, right-click a blank part of the Design
Window. This brings up a popup menu:
Try this! You can change the grid spacing, drag the
slider. See Setting grid spacings
Displaying the grid
Click View > Display Grid to hide or show the grid.
You can show or hide the grid at any time.
To display the grid
Click the Display Grid icon to toggle grid display on or
off.
Alternatively select View > Grid.
Alternatively, right-click a blank part of the Design
Window. This brings up a popup menu:
Try this! You can change the grid spacing by dragging
the slider. See Setting grid spacings
Chapter 4 Basic Procedures
Toggle hoop display on/off
for details.
Toggle grid display on/off
for details.
29