Janome DigitizerPro Instruction Book page 56

Select
required
hoop type
Define
hoop
dimensions
3 In the Format panel, select Rectangle or Oval as
required.
4 Adjust the settings in the Dimensions panel as
required:
For an oval hoop, enter Rectangle Height, Total
Height and Width.
For a rectangular hoop, enter the Height and the
Width of the rectangle.
Try this! You can create a circular hoop by entering '0'
in Rectangle Height field and setting Width and Total
Height fields to the same size.
Define hoop
dimensions
Warning In order to avoid the possibility of the needle
hitting the rim of the hoop, the size definition must be of
the embroidery area of the hoop and not its
external dimensions.
5 Save the new or edited hoop definition:
If you are saving a modified hoop, click the Save
Hoop button.
JANOME Embroidery Software Instruction Book
If you are saving the definition as a new hoop, click
the Save Hoop As button and enter a hoop name in
the Save Hoop As dialog.
My rectangle hoop
6 Click Save.
7 Click OK to close the Work Environment dialog.
Chapter 7 Grids and Hoops
54