Main Serial/Telnet Configuration Screen
After running through an initial self-test, the screen will display the following message:
"<Press Enter> for Device Configuration." Press Enter to display the main
configuration screen:
Saved Values. <These values will be active after reboot>
IP Address
Subnet Mask
Default Gateway -
Server IP Addr
New Prom File
Current Values. <These values are in u
IP Address
Subnet Mask
Default Gateway –
Server IP Addr
New Prom File
C
ommunity String:
Press
I
to enter new saved parameter values. Press
Press
T
to enter new Trap Destination. Press
Press
C
to enter new Community String. Press
Press
E
to End session. Type
Press
SpaceBar
for additional commands.
Saved Values — displays changes made during current session.
•
IP Address (MUST be assigned during initial configuration)
•
Subnet Mask (MUST be assigned during initial configuration)
•
Default Gateway
•
Server IP Address
•
Prom File Name
Current Values — displays values currently in use.
•
IP Address (IP address of SNMP agent)
•
Subnet Mask (mask to define IP subnet to which agent is connected)
•
Default Gateway (default router for IP traffic outside subnet)
•
Server IP Address
•
Prom File Name
Commands
•
I = Enter New Saved Parameter Values
•
P = Change Password
•
T = New Trap Destination
•
K = Remove ALL Trap Destinations
•
C = New Community String
•
U = Delete ALL Community Strings
•
D = Enable/Disable DHCP
•
E = End Session
•
Space Bar = Opens device specific configuration options (tasks, memory,
cleandb, download, version, reboot, sysname, accounts, and modules).
-
000.000.000.000
-
000.000.000.000
000.000.000.000
-
000.000.000.000
-
promfilename
-
000.000.000.000
-
000.000.000.000
000.000.000.000
-
000.000.000.000
-
promfilename
public
Access:
REBOOT
DHCP is not active
se now>
r/w
P
to change Password.
K
to remove
U
to remove
to
reboot unit. Press
11
ALL
Trap Destinations.
ALL
Community String
D
for
DHCP
On/Off.
s.