Advertisement
ASSEMBLY INSTRUCTION
5
Screw Holding Bolts into the Lower Receiving Bracket
Parts needed: Lower Receiving Bracket, Holding Bolts
7
Attach Lower Receiving Bracket to Coupler Bracket
> Secure lower bracket to
Coupler Bracket with Rosette
thumb nuts
Parts needed: Installed Coupler Bracket, Receiving Bracket, Rosette Nuts
3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2008 ikan Corporation. All right reserved.
IKAN PT2000 TELEPROMPTER
6
Attach Tripod Holding Plate to Lower Receiving Bracket
Parts needed: Lower Receiving Bracket, Tripod Holding Plate
8
Attach Your Camera to Upper Receiving Bracket
1"
Parts needed: Upper Receiving Bracket, 1/4-20"Screw, 3-Arm Thumb Nut
> Secure your camera to
upper receiving bracket
> Position your camera
approximately 1" away
from the bracket edge
** some cameras may not
require 1" gap.
Advertisement
