Advertisement
ASSEMBLY INSTRUCTION
1
Insert the Receiving Nut in the receiving channel of
the V8000 Monitor
Parts needed: V8000 Monitor, Receiving Nut
3
Remove protective film from telepromter glass
> Unscrew 4 x small Philips Head
screws
> Remove glass holding tabs on
both sides
Parts needed: Metal Frame, Philips Head Screwdriver
3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2008 ikan Corporation. All right reserved.
> Peel away the protective film
> Re-install the teleprompter glass
back into metal metal frame
IKAN PT2000 TELEPROMPTER
2
Attach Coupler Bracket to V8000 monitor
Parts needed: 1/4-20"Screw, 3-Arm Thumb Nut, Coupler Bracket
4
Attach Metal Frame to Coupler Bracket
Parts needed: Metal Frame, Coupler Bracket, Philips Head Screwdriver
①
> Unscrew two large Philips Head
screws
> Attach metal frame
> Secure with the two
②
to holding bracket
Philips Head screws
Advertisement
