HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
Software Installation Procedure
Windows 98
To install the network driver when your PC is running Windows 98:
Users
1 Start the PC. Windows 98 will automatically detect a new PCI
2 Select Search for the Best Driver and click on Next.
3 Select Floppy Disk Drives only, insert EtherDisk
4 When asked about what you want to install, select The Updated
5 The 3Com EtherLink 10/100 PCI For Complete PC Management NIC
6 If prompted to insert 3Com Etherdisk for 3Com EtherLink PCI
7 Follow the remaining onscreen instructions and enter the
8 Click on Finish to complete the network component installation.
9 When prompted to reboot, remove your driver diskette and click
10 Windows 98 Second Edition users only: If you want to use
11 Click on Start
12 Double click on Network.
13 In the list, select 3Com EtherLink 10/100 PCI For Complete PC
14 In the properties window, click on the Power Management tab and
15 Click on OK to complete the configuration.
Confirming Installation
Checking the
To confirm that the network interface card driver is properly
installed in a PC running Windows 95 or Windows 98:
Driver Installation
12 English
Ethernet Controller. Click on Next to begin the installation.
your drive and click on Next.
Driver (Recommended) and click on Next.
(3C905C-TX) driver files will be automatically found, click on Next
to begin the driver installation.
NICs (diskette 1), type A:\ at the Copy Files From prompt and
press E
. Similarly, insert diskette 2 and press E
NTER
prompted.
location of the Windows 98 files (CAB files) when prompted,
then click on OK. On HP Windows 98 preloaded systems, the path
is C:\WINDOWS\OPTIONS\CABS.
on Yes. The software installation is complete.
the Remote Wake-Up feature of the card with ACPI Power
Management, you must enable it as follows:
Management NIC (3C905C-TX) and click on Properties.
place a tick in the box next to Allow the device to bring the PC out of
Standby.
Settings
Control Panel.
®
diskette #1 in
when
NTER
Need help?
Do you have a question about the D7522A 10/100 3Com 3C905C-TX and is the answer not in the manual?
Questions and answers