HP Integrity rx2600 Operation And Maintenance Manual page 23

Remove/Replace Prerequisites
■
■
■
Read the Power and EMI Warning and Note
Å
WARNING: For most of the installation and removal procedures in this chapter, you must:
1. Power off the system.
2. Unplug the system power cord from the AC power outlet.
Ä
CAUTION: To maintain FCC Electromagnetic Interference (EMI) compliance, verify that all covers are
replaced and that all screws are properly seated.
Gather Your Tools
■
■
■
■
■
Follow Electrostatic Discharge (ESD) Precautions
■
■
■
■
■
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Installing or Replacing Parts and Accessories
2–5