Charging The Batteries; Placing The Ups In Operate Mode - HP R6000 series User Manual

Charging the Batteries

When the UPS is in Standby mode, allow the batteries to charge before putting the UPS into
service.
IMPORTANT: The battery modules will charge to:
•
Ninety percent of their capacity within 4 hours
•
One hundred percent of their capacity within 24 hours
Allow the batteries to charge for at least 24 hours before supplying backup power to your devices.

Placing the UPS in Operate Mode

Press the On button (1) to transfer the system to Operate mode.
Figure 2-5: On button
HP Uninterruptible Power System R6000 Models User Guide
Operation
2-5