Redring 1070800E Manual page 6

Tank access and replacing parts
Task
Replace Thermistor Steam Sensor
Operation
1. Directions as above in Cover Removal.
2. Remove PCB cover plate.
3. Remove the thermistor.
4. The probe end of the thermistor pushes into the
condensor tube so that the tip just covers the hole
drilled in the condensor tube.
5. Re-connect the sensor to the PCB at either NTC 1 or
NTC 2, in any order.
Condensor Tube
Page 6 of 8
con't.
Sensor Probe