Table of Contents
Advertisement
Displayed
Code meaning
code
The washer is in automatic weighing state
Code for the clothes weight:
X=1(i.e. AL-1) displays when there are no clothes or less than 2kg clothes in the
washer-dryer;
X=2(i.e. AL-2) displays when there are about 2-4kg clothes in the washer-dryer;
X=3(i.e. AL-3) displays when there are about 4-6kg clothes in the washer-dryer;
X=4(i.e. AL-4) displays when there are about 6-8kg clothes in the washer-dryer;
X=5(i.e. AL-5) displays when there are about 8-10kg clothes in the washer-dryer.
Being inconsistent with the conditions
for door opening,it is not allowed to
unlock the door
Child lock prompt
The whole program ends
Abnormal door locking or unclosed
door
Drainage faulr (The words "Drain
Filter" on the display screen flash)
Abnormal water feed
Abnormal drying water level
Unbalanced clothes distribution when
spinning(The words "Imbalance" on the
display screen flash)
The clothes weight is beyond the
acceptable range (The words
"Overload" on the display screen flash)
Abnormal drying filter
In case of the following alarms, press the "Off" button to clear them. If they remain, unplug the power plug and contact our
After-sales Service Department.In case of the following alarms, press the "Off" button to clear them. If they remain, unplug the power
plug and contact our After-sales Service Department.
23
Solution
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Close the door ; if the code remains,please ask for repair
Check whether the outlet of drain pipe is 10cm above the floor;
Clean the drain filter and check whether the drain pipe is
clogged;if the code remains, please ask for repair
Check whether the water tap is turned on, whether the water
pressure istoo low ,whether power supply cut-off occurs.Press
the "Start/Pause" button to clear it, if the code remains,please
ask for repair
Check whether the outlet of drain pipe is 10cm above the floor;
Clean the drain filter and check whether the drain pipe is
clogged;if the code remains, please ask for repair
Check the adjsuyable feet to confirm whether the washer-dryer
is level;
Take out and fluff out the clothes;if the code remains,please ask
for repair
Take out some clothes
Reinstall the drying filter; if the code remains,please ask for
repair
Contents
1
Safety Precautions
2
3
4
5
6
Control Panel and Program Description
7
Display Screen
8
Programs Guide
9
Operational Procedures
10 General Program Running Process
13 Other Functions
14 Cleaning/Maintenance
15 Fault Diagnosis and Solution
1
2
4
5
5
9
11
13
14
15
16
16
17
19
21
Advertisement
Table of Contents
