Connecting Ac Power Cord; Connecting A Computer - Sanyo LCD-24K50 Instruction Manual

This LCD TV uses nominal input voltages of 110-240V
AC. This LCD TV automatically selects the correct
input voltage. It is designed to work with single-
phase power systems. To reduce risk of electrical
shock, do not plug into any other type of power
system. Consult your authorized dealer or service
station if you are not sure of the type of power being
supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the LCD
TV is not in use.
Cables used for connection (These cables are not
supplied with this LCD TV.)
● PC/VGA Cable (D-SUB 15pin)
● HDMI Cable: HDMI Input
● MAC Adapter (in the case of connecting Macintosh
computer)
● Audio Cable [Mini Plug (L/R)]
Desktop
IBM-compatible
type
computers
or Macintosh
computers
(VGA / SVGA /
XGA )
HDMI Output
Digital AV Equipment
Audio Output
Note:
1. You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter.
2. When inputting 1080p signal to HDMI terminal, please use High Speed HDMI Cables to avoid picture/
sound noise and no picture/sound.

CONNECTING AC POWER CORD

CONNECTING A COMPUTER

Laptop
type
HDMI Input
Audio Input
(stereo)
(stereo)
CONNECTING LCD TV
AC POWER CORD
To t h e A C O u t l e t ( 11 0
- 2 4 0 V A C ) . P u l l s t h e
AC power cord out from
t h e L C D T V. T h e A C
outlet must be near this
equipment and must be
easily accessible.
NOTE:
When connecting the cables, AC Power Cords
of both LCD TV and external equipment should
be disconnected from AC outlet. Turn LCD
TV and peripheral equipment on before your
computer is switched on.
Monitor Output
PC Input
MAC
Adapter
9