Timer; Osd - Sanyo LCD-24K50 Instruction Manual

MENU OPERATION (TV/AV/HDMI mode)

TIMER

1
Press MENU button and the main menu will appear.
Press POINT ◄► buttons to select "TIMER", and will display
TIMER menu.
2
Press POINT ▲▼ buttons or ENTER button to enter into
TIMER menu.
3
Press POINT ▲▼ buttons to select the item desired.
4
Press POINT ◄► buttons to enter the item selected.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds to exit menu
operation.
OFF TIMER: Once OFF TIMER has been set, when the set time is reached, the TV will shift to stand-by
status. To select "OFF", "30 MIN", "60 MIN", "90 MIN" or "120 MIN" with POINT ◄► buttons or TIMER
button. To cancel "OFF TIMER ", you can choose any option by the following ways.
- Setting "OFF" in OFF TIMER menu.
- Pressing POWER ON/OFF button on Side Control.
- Pressing POWER ON/OFF button on Remote Control.
ON TIMER: Once ON TIMER has been set, you won't miss any opportunity to watch the program you like.
To set channel position, you can use NUMERIC buttons or DIGIT button. After ON TIMER has been set, ON
TIMER INDICATOR will be light. To cancel "ON TIMER MODE", you can choose any option by the following
ways.
- Setting "- - : - -" in ON TIMER.
- Disconnecting the AC power cord.
ON TIMER CH: This function is only active that ON TIMER has been set. When the set time in ON TIMER
is reach, the TV will turn on and enter the channel position you set directly. To set channel position, you can
use NUMERIC buttons or DIGIT button.
Note:
● When OFF TIMER countdown time reach 1 minute, OFF TIMER OSD always showed for user information
about power off time remain.
● OFF TIMER will be cancel when press any button during the countdown time dsplay.
● If ON TIMER didn't set, ON TIMER CH function will not actived.
● OFF TIMER and ON TIMER will be automatically cancelled during searching channels.
● The settings for OFF TIMER and ON TIMER will be automatically cancelled after the settings has been
operated for one time.
● In case you left TV without any operation for 2 hours after power on by ON timer, TV will automatically power
off itself.

OSD

1
Press MENU button and the main menu will appear. Press POINT ◄►
buttons to select "OSD", and will display OSD menu.
2
Press POINT ▲▼ buttons or ENTER button to enter into OSD menu.
3
Press POINT ▲▼ buttons to select the item desired.
4
Press POINT ◄► buttons to enter the item selected.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds to exit menu operation.
LANGUAGE: Press POINT ◄► buttons to choose ENGLISH, ARABIC or
PERSIAN.
H-POSITION: OSD moves to the left side when POINT ◄ button is pressed.
OSD moves to the right side when POINT ► button is pressed. (0~100)
TIMER MENU
TIMER
OFF TIMER
OFF
ON TIMER 12 : 30
ON TIMER CH
16
: : : :
SELECT ADJUST BACK EXIT
OSD
LANGUAGE ENGLISH
H - POSITION
V - POSITION
5 SEC
DURATION
TRANSPARENCY
INPUT LABEL
: :
SELECT ADJUST : BACK
OSD
INPUT LABEL
AV1 OFF
AV2 OFF
HDMI OFF
: SELECT : :
ADJUST BACK
:
EXIT
:
EXIT
19