Selecting Input Source; Channel Recall; Channel Selection; Info - Sanyo LCD-24K50 Instruction Manual

SELECTING INPUT SOURCE

Select mode "TV", "AV1-S", "AV2", "HDMI" or "PC" by pressing INPUT button on Remote Control or on
Side Controls, you can also press POINT ▲▼ buttons to select different mode. To enter the selected mode,
press ENTER button or POINT ◄► buttons.
INPUT
TV
1. TV
2. AV1-S
3. AV2
4. HDMI
5. PC
: SELECT : EXIT
BACK
1~5
Note:
● User can directly displayed selected input source by
pressing NUMERIC buttons (1-5) on Remote Control.

CHANNEL RECALL

Press CHANNEL RECALL button to switch between
the previous channel and the current channel.
For example, now you are watching channel "4", but
you watched channel "2" previously. If you press
CHANNEL RECALL button, channel "2" will appear
immediately.

CHANNEL SELECTION

There are 256 channels can be selected on the LCD TV.
DIRECT SELECTION
For direct access to programmes using the (0-9) numeric buttons.
1) For selection of channel position 0 - 9. Example: For
channel position 8, press "8" button.
2) For selection of channel position 10 - 99. Example:
For channel position 25, press the DIGIT button to
display "- -", then press "2" and "5" buttons.
3) For selection of channel position 100 - 199. Example:
For channel position 125, press the DIGIT button
twice to display "1 - -", then press "2" and "5" buttons.
4) For selection of channel position 200 - 255.
Example: For channel position 225, press the DIGIT
button three times to display "2 - -", then press "2"
and "5" buttons.
CHANNEL UP/ DOWN
Press CHANNEL UP/DOWN (▲▼) buttons on Side Control or on Remote Control to select programs.
● Press CHANNEL UP (▲) button to select next channel.
● Press CHANNEL DOWN (▼) button to select previous channel.
Note:
CHANNEL RECALL and CHANNEL SELECTION function only use in TV mode.

INFO

Press INFO button on Remote Control to display the status of LCD TV. Press again to remove the display.
Channel
11
Colour System
AUTO
D/K
Sound System
A
Bilingual
BASIC OPERATION
SIDE CONTROL
REMOTE CONTROL
INPUT button
INPUT button
INFO button
NUMERIC
buttons
CHANNEL UP/
DOWN (▲▼)
buttons
CHANNEL
RECALL button
DIGIT button
13