Raymarine HSB2 Plus Series Owner's Handbook Manual page 114

5-10
3. You can use the soft keys to edit the waypoint position as described in Edit-
ing the Waypoint Details on page 5-13.
It is added to the Waypoint List and named with the next available number.
To return to the default soft key display, press ENTER or CLEAR twice.
➤ To place a waypoint as Loran TDs using the Waypoint List:
1. Press MARK , followed by the WAYPOINT LIST soft key; the Waypoint List
and associated soft keys are displayed.
2. Press the MAKE NEW WAYPOINT , the waypoint is placed at the current ves-
sel position, or if not available, the cursor position. To change the position
press the LORAN TDs soft key; the WPT POSITION (LORAN TDs) screen is dis-
played, with it's associated soft key.
Note: You can enter waypoints as Loran TDs which are converted to Lat/Long
coordinates. However, although the waypoint is shown in both Lat/Long and
Loran TDs in the Waypoint List, you can subsequently only edit the position as
Lat/Long coordinates. TD entries in the Waypoint List are shown only for
those waypoints which were entered as TDs.
WAYPOINT LIST
POSITION
BRG _186°
RNG _21.0nm
---°
2
hsb PLUS Series Color LCD Display
---
D4262-2