Quinny zapp xtra Cv217 User Manual page 7

8
Removing or Reversing
Seat
It is necessary to remove
seat from frame when
preparing to use the car seat
adapters.
Locate grey tab behind seat
(Figure 8).
Rotate release tab outward,
then squeeze recline button
in all the way (Figure 8).
While squeezing recline
button in and while tab
is rotated out, lift seat off
frame (Figure 8a).
Tip: Place free hand on side
of seat close to hub to easily
lift off seat frame.
Reverse direction of seat and
evenly place seat onto seat
adapters (Figure 8b).
TM
8
1
2
8a
8
3
7
8b
4
9
Seat Adapters
NOTE: Seat adapters are
preassembled on frame and
must always be in place to
attach seat. Seat adapters
should only be removed
when using the infant car
seat adapters.
To remove adapters, swivel
grey tabs and slide adapters
off (Figures 9-9a).
To reattach seat adapters,
open stroller frame, lift up on
grey tab to expose slots, align
slots with frame, slide adapters
in and push down on grey
tabs (Figures 9-9a).
6
9
NOTES: Seat adapter labeled
1 fits into frame hub labeled
1
1. Seat adapter labeled 2
fits into frame hub labeled
2. Numbered adapters and
frame hubs match up only
when frame is in the open
and in-use position.
7
To Use
9
1
9a
Grey
Tab
2