Quinny zapp xtra Cv217 User Manual page 10

To Use
WARNING
To avoid serious injury:
• Use ONLY with Maxi-Cosi Mico
Car Seats with the adapters provided with this
stroller.
• Please refer to the manufacturer's instructions for
the use of your infant car seat.
• ALWAYS install car seat facing the stroller
handles.
• ALWAYS use the restraint system in the car seat.
14
Install Infant Car Seat
Remove the seat and seat adapters (see steps 8 and 9). Push the
parking brake pedal down.
Insert left and right car seat adapters into frame hub until you hear a
"click" as shown (Figure 14).
Car seat must be positioned so child faces
the stroller handles.
Lower car seat into car seat adapters until both sides "click" (Figure 14a).
Lift up on handle to ensure it is securely in place.
To remove Mico, press and hold both buttons on car seat (Figure 14b). Lift
car seat up.
To remove Prezi , pull release behind car seat and lift up (Figure 14c).
TM
To remove car seat adapters, press gray button and slide adapter off hinge
points (Figure 14d).
® and Prezi Infant
TM
10
14
1
14a
3
14c
6
7
TM
2
14b
5
14d