Power Management Setup - Fujitsu GA-8ISXT-FS P4 Titan User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
ACPI Suspend Type
Power LED in S1 State
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC BACK Function
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1.
S3(STR) Set ACPI suspend type to S3. (Default Value)
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less
than 4 sec.
GA-8ISXT-FS Motherboard
Power Management Setup
[S3(STR)]
[Blinking]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 0 0
[Disabled]
[Disabled]
Enter
[Memory]
F6:Fail-Safe Defaults
Figure 5: Power Management Setup
- 41 -
Item Help
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F1:General Help
F7:Optimized Defaults