Usb Controller - Fujitsu GA-8ISXT-FS P4 Titan User Manual

On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
On-chip SATA
Disabled Disable SATA controller.
Auto When no device is plugged in IDE1 or IDE2, SATA controller will remap to IDE
controller. (Default Value)
Manual Set SATA Mode manually.
SATA Port0 Configure as
IDE Pri. Master
IDE Pri. Slave
IDE Sec. Master
IDE Sec. Slave
SATA Port0
SATA Port1
SATA Port1 Configure as
The values depend on SATA Port0 .

USB Controller

Enabled Enable USB Controller. (Default value)
Disabled Disable USB Controller.
GA-8ISXT-FS Motherboard
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slave.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slave.
SATA controller set to SATA port0. As this mode, it support by WinXP
or later OS only. (Default value)
SATA controller set to SATA port1. As this mode, it support by WinXP
or later OS only.
- 38 -