System Requirements; Installation - Fujitsu ScanSnap S1300i Getting Started Manual

■ System Requirements

Windows
Operating
Windows Vista
system
Windows
®
Intel Pentium
CPU (Recommended: Intel
GHz or higher)
®
Windows
32-bit: 1 GB or more
64-bit: 2 GB or more
Memory
Windows Vista
®
Windows
512 MB or more
(Recommended: 1 GB or more)
Display
800 × 600 pixels or higher (*3)
resolution
2290 MB or more of free hard disk
space is required
Hard disk
(2740 MB or more of free hard disk
space (*4)
space is required for using with
Rack2-Filer)
USB port (*5) USB2.0/USB1.1
*1: Service Pack 1 or later is required
*2: Service Pack 3 or later is required
*3: When the font size is large, some screens may not be
displayed properly.
In that case, use a smaller font size.
®
*4: For Windows Vista and Windows
.NET Framework 3.5 SP1 is not installed, a maximum
of 500 MB of additional free hard disk space is
required for it.
*5: When using USB 3.0 port, it works as USB 2.0.
ATTENTION
If the system requirements above are not satisfied,
the ScanSnap may not operate.
Scanning speed will slow down in the following
cases:
- The CPU or the memory does not meet the
required specifications
- The version of the USB port or the USB hub is
USB 1.1
The actual increase in used disk space after
installation and the required disk space for
installation may differ from each other depending on
®
your Windows system disk management.
®
7 (32-bit/64-bit)
®
(32-bit/64-bit) (*1)
®
XP (32-bit) (*2)
®
4 1.8 GHz or higher
®
Core™2 Duo 2.2
(32-bit/64-bit)
7
®
(32-bit/64-bit)
XP (32-bit)
®
XP, if Microsoft

■ Installation

1.
Turn on the computer and log on as a user
with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-
ROM drive.
The [ScanSnap Setup] dialog box appears.
HINT
If the [ScanSnap Setup] dialog box does not
appear, double-click "ScanSnap.exe" in the
DVD-ROM via Windows Explorer.
3.
Click the [Install Products] button.
The [Install Products] dialog box appears.
4.
®
Click the [ScanSnap] button.
Follow the instructions on the screen to continue
with the installation.
If installation is not completed successfully, click the
[Manuals] button in the [ScanSnap Setup] dialog box,
and then the [Troubleshooting (installation)] button,
and refer to Troubleshooting (installation).
3