Programmable Thermostat - Friedrich SS08 Installation And Operation Manual

Programmable Thermostat

Your unit's digital control features an advanced 7 day programmable
thermostat feature that can be used to turn the unit on or off or even
change modes and maintain temperatures throughout the day.
Factory settings are shown in addendum 1 (Schedule Table with Energy
Saving Values). These values can be changed by following the procedures
in the preceding paragraphs. Basic options are: Four (4) day groups.
1. Monday through Friday.
2. Saturday and Sunday only.
3. Monday through Sunday.
4. Individual days (Mon thru Sun).
Each of the day groups have four (4) time periods: WAKE (06:00), AWAY
(08:00), RETURN (18:00), and NIGHT (22:00).
The start time for each of the time periods can be changed. In addition,
each time period can have its own temperature and fan mode.
For example, let's say you are in a cool climate region. You leave for work
at 08:00 and return home around 18:30. You can set the temperature lower
while you are away from your home. At 18:00, you set the temperature
higher for the RETURN period so the room is nice and comfortable when
you arrive.
Set Schedule Sequence – 1 Wake Period
SYSTEM
FAN
AUTO
MODE
AUTO
FAN
SPEED
SCHEDULE
Press and hold for three (3) seconds to enter the schedule setting
mode and returns to normal display without saving any settings that might
have been changed. To exit and save the changes, press and hold
for three (3) seconds. All changed parameters will be saved. The
key allows the user to back up through the menus.
SYSTEM
FAN
MODE
FAN
SPEED
M T W T F S S
SCHEDULE
the schedule icon blinks. The display begins with all weekday (MTWTF)
dots lit. Changes made will apply equally to all weekdays.
36
SET POINT <- COOL
F
A
M
WAKE
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
The user can select a different day group by pressing
continues to press
in the following order: MTWTF SS Mon, Tues, Wed, Thur,
Note the last day group is each individual day. In other words, the user can
adjust each of the four (4) time period start times per day. This is a real
helpful feature if you have an adjustable work shift. Each day group begins
showing the start time for the wake time period.
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
To change the time, press
the time by 15 minute jumps. Once the correct time is set, press
advance to the next step.
Set Schedule Sequence – 2 Wake Period
DISPLAY
ENTER
SYSTEM
FRR032
FAN
MODE
FAN
SPEED
SCHEDULE
Now you can adjust the settings for SYSTEM, FAN MODE, FAN SPEED
BACK
and TEMPERATURE.
SYSTEM
FAN
DISPLAY MODE
ENTER
FAN
FRR033
SPEED
SCHEDULE
Press ,
(UP) or
M T W T F S S
WAKE
, the system will cycle through all the day groups
,
M T W T F S S
WAKE
(UP) or (DOWN) to increment/decrement
CONTINUOUS
M T W T F S S
WAKE
CONTINUOUS
M T W T F S S
WAKE
, or to change the perspective option. Use the
(DOWN) to adjust the cool setpoint.
BACK
A
M
DISPLAY
ENTER
FRR034
. If the user
Fri, Sat, Sun.
BACK
A
M
DISPLAY
ENTER
FRR035
to
BACK
F
DISPLAY
ENTER
FRR036
BACK
SET POINT <- COOL
F
DISPLAY
ENTER
FRR037